- Vehicle Specific
- Interior / Exterior
Bolt on turbo, Garrett 450HP GT3071R ball bearing turbo with all oil and coolant hardware. Bolts to stock flanged manifold and cat (or ATP 3" cat delete pipe and long downpipe).
Garrett's GT3071R turbo coupled with an ATP high flow exhaust housing developed for the Genesis Coupe 2.0T engine for ease of installation and stock-like appearance.
Our production of this Garrett based dual ball bearing turbo for your Genesis 2.0T Coupe is now complete the result is well beyond our expectations.
This is a very responsive and powerful turbo capable of making full boost by 3800 rpms and 400WHP (450 crank HP) and just as much torque, on as little on 23-24 psi of boost on an internally stock engine when tested with our 3" turbo back exhaust system. This turbo has awesome drivability, and, with the proper supporting mods, has as much bottom end , a lot more mid-range than the stock turbo while capable of flowing enough air to allow you more than double the HP of the 2.0T engine reliably.
Work with your Tuner to add a complimentary fueling/tuning solution and you're good for the ultimate streetcar that is capable of running deep into the 12's and close to 120MPH trap speeds should you choose to make an occasional trip to the dragstrip.
|Fits:||2010-2012 Genesis Coupe 2.0T|
|Fits:||2010-2012 Genesis Coupe 2.0T BASE|
|Fits:||2010-2012 Genesis Coupe 2.0T TRACK|
|Fits:||2010-2012 Genesis Coupe 2.0T PREMIUM|
|Fits:||2010-2012 Genesis Coupe 2.0T R-SPEC|