Your dome light, or single light located in the center of the ceiling, uses an incandescent bulb from the factory, giving it a yellowish color. By replacing with an LED, you can add a luxurious and modern look to your vehicle, with a cool white color, just like the lights on newer luxury vehicles. You can also increase the brightness with SMF6 or SMD12 Board, to improve the performance of your dome light.
The installation is 100% plug-and-play, just replace your factory bulb!
SMF2: This bulb has a standard festoon base, with two 5050-size Epistar SMDs and a protective cover for added durability and style. Direct replacement, plug and play.
SMF6: Standard festoon base, with six 5050-size Epistar SMD chips arranged on a rectangular panel. Direct replacement, plug and play.
SMD12 Board: This is an LED panel, fitted with 12 5050-size Epistar SMD chips. Comes with spring-loaded festoon-style adapter for direct installation. Plug the adapter into the bulb socket, then just stick the board in place with the mounting adhesive pad. The board-and-adapter design allows for extremely high brightness compared to a simple bulb.
Included in your order is ONE BULB.
These LEDs are available in many crisp, bright colors. White and warm white are the most popular colors, for a modern look with maximum visible light.
You can also select blue, red, green, or amber to add a unique look to your interior. Please note- when ordering these unique colors, we recommend moving to the next-brighter stage for acceptable light output.
Diode Dynamics offers several brightness options so you can choose what fits you best. These options are listed by the design and the lumen output of each bulb:
SMF2: Slightly lower brightness than OEM bulbs, but still provides the crisp, modern color of LED.
SMF6: Slightly higher brightness than OEM bulbs.
SMD12 Board: Much brighter than OEM bulbs. These are bright!
Lumens: BUYER BEWARE! Most sellers just provide "calculated" lumen numbers, based on the maximum potential brightness of the LED chips on the bulb. For example, if a bulb has five 10-lumen chips, they will rate it at 50 lumens. However, this is not accurate, as the design of an LED bulb does not get rid of heat fast enough to run the LEDs at maximum.
These "calculated" lumen ratings are much, much higher than the true, measured light output, so it will look like competitors' bulbs are brighter than ours. This is because Diode Dynamics does not provide inflated "calculated" numbers; we believe it is misleading. We test the actual brightness of the bulbs in our lab, to provide real lumen output measurements. Our measurements are accurate, but they are usually much lower than the misleading "calculated" figures. Please click here to learn more about LED brightness measurement.
LED Components. Diode Dynamics uses only the highest quality LED chips in the production of its bulbs. This means we use only brand-name suppliers such as Epistar, Cree, Osram, and Samsung.
While Diode Dynamics bulbs may look the same as others on the market, most copycat bulbs use economy-grade LED chips in order to reduce costs. This greatly reduces the reliability and overall brightness of the bulb when you compare it to Diode Dynamics.
Construction. Although LED technology allows for extremely long bulb life, the market is flooded with cheap LED bulbs that fail prematurely due to inferior construction. The worst enemy of LEDs is excessive heat, and when bulbs are not designed properly, they do not disperse heat as well, leading to premature failure.
Off-brand, cheap bulbs exhibit poor solder uniformity, high levels of flux in the solder, uneven chip placement, low-gauge terminal wires, poor assembly, and bulbs held together with inferior adhesives. At best, solder joints will crack and fail on low-quality LEDs after a few weeks of use. In the worst case, these bulbs can damage housings as the extra flux and adhesive evaporates and creates a residue on the lens of the housing.
Diode Dynamics bulbs are produced with modern, computerized equipment, and only the best materials, to ensure complete uniformity, high quality, and long bulb life.
All Diode Dynamics products come with a 30-day satisfaction guarantee and a 3-year limited replacement warranty. For more information, please view the Warranty Information page.
Over all fantastic. From the ordering process, to how fast the shipping is and also the customer service. This is why I only shop on GenRacer for my coupe! Keep up the stellar work
Posted By: David Taylor
I recently purchased the ARK test pipes for my 2010 Hyundai Genesis Coupe 3.8 and must say was the best thing I’ve done aside from from getting my aftermarket exhaust. Sounds louder and drives faster! No hassle, got the pipes within three days. Thank you GenRacer,
Posted By: Joey Coughlan
Product: Ark Test Pipes
Most places just sell parts and when you call them it feels like you are bothering them. My last transaction with GENRACER left nothing to be desired, meaning it could have not been better. I purchased front and rear WHITELINE sway bars, front & rear DBA rotors, and EBC YELLOWSTUFF brake pads. I called just after I ordered the parts because I received an "out of stock" email notification. When I called back to chat with someone *** answered the phone. He couldn't have been more knowledgeable about exactly what I was looking for when it came to the right brake pad for my needs (street/track). Come to find out the pads I picked (DBA's) were not the best pads for my application so im very glad I talked to ***!! I just recently had everything installed, bedded the pads and I am so happy I used GenRacer for my 16 R-Spec Coupe!! Thanks again ***!!!
Posted By: Steve Richard
Product: EBC Brakesm
This is the best website I have ever ordered my parts from.. everything is shipped on time and in perfect condition. I will keep ordering parts from you guys until I run out of parts to order Haha
Posted By: Lauren Bryant
Product: Spec D Tail lights
Order came fast and looks amazing on my car. I did have one problem where one tail light would blink sequentially and the other didn’t. I sent an email late in the day inquiring about it. I wasn’t expecting a response until at least the following day as it was so late. Within an hour they had gotten back to me informing me of a switch on the inside of the housing where you can choose sequential or regular. Sweet! Top notch customer service.
Posted By: Kevin F.
Product: Spec D Tail Lights