Prevent Hyperblinking. When you replace incandescent turn signal bulbs with LEDs in most vehicles, the vehicle will start hyperblinking. This is because the LED uses much less power, and the vehicle thinks the bulb is out. You can easily fix this problem by installing resistors.
Installation. Each resistor has 6" leads for easier installation, and has a rating of 50 watts, 6ohm. This is usually enough to compensate for one bulb. If you are installing four LED turn signals (front and rear), we recommend four total resistors.
To install, connect one side of the resistor to the positive turn signal wire, and the other side to negative (ground) with included connectors. To determine which wires to tap on a dual filament socket, we recommend using a voltmeter to test the two power wires. Simply engage your turn signal on the side you're installing the resistor, touch your voltmeter probe to each pin inside of the socket, and the pin that gives a voltage readout is the power wire that needs to be tapped. Typically the ground wire is a black wire.
Experience. After over a decade in business, Diode Dynamics is the most trusted name in automotive LED lighting. Unlike every other LED distributor, we manufacture and engineer products ourselves in the United States, for high quality and fast time-to-market of the newest and brightest LED technologies. We pride ourselves in offering only quality LED products, that will exceed your expectations. Please contact us if you'd like to discuss your lighting project!
Over all fantastic. From the ordering process, to how fast the shipping is and also the customer service. This is why I only shop on GenRacer for my coupe! Keep up the stellar work
Posted By: David Taylor
I recently purchased the ARK test pipes for my 2010 Hyundai Genesis Coupe 3.8 and must say was the best thing I’ve done aside from from getting my aftermarket exhaust. Sounds louder and drives faster! No hassle, got the pipes within three days. Thank you GenRacer,
Posted By: Joey Coughlan
Product: Ark Test Pipes
Most places just sell parts and when you call them it feels like you are bothering them. My last transaction with GENRACER left nothing to be desired, meaning it could have not been better. I purchased front and rear WHITELINE sway bars, front & rear DBA rotors, and EBC YELLOWSTUFF brake pads. I called just after I ordered the parts because I received an "out of stock" email notification. When I called back to chat with someone *** answered the phone. He couldn't have been more knowledgeable about exactly what I was looking for when it came to the right brake pad for my needs (street/track). Come to find out the pads I picked (DBA's) were not the best pads for my application so im very glad I talked to ***!! I just recently had everything installed, bedded the pads and I am so happy I used GenRacer for my 16 R-Spec Coupe!! Thanks again ***!!!
Posted By: Steve Richard
Product: EBC Brakesm
This is the best website I have ever ordered my parts from.. everything is shipped on time and in perfect condition. I will keep ordering parts from you guys until I run out of parts to order Haha
Posted By: Lauren Bryant
Product: Spec D Tail lights
Order came fast and looks amazing on my car. I did have one problem where one tail light would blink sequentially and the other didn’t. I sent an email late in the day inquiring about it. I wasn’t expecting a response until at least the following day as it was so late. Within an hour they had gotten back to me informing me of a switch on the inside of the housing where you can choose sequential or regular. Sweet! Top notch customer service.
Posted By: Kevin F.
Product: Spec D Tail Lights