Upgrade your Hyundai 2.0T engine build with Manley Turbo Tuff Forged I-Beam Connecting Rods, Part #14410-4.
Manufactured from aircraft-quality vacuum-degassed 4340 forged steel, these performance connecting rods are designed for demanding turbocharged engine applications.
This kit includes four forged connecting rods, providing a complete set for a compatible four-cylinder engine.
Genracer lists these Manley connecting rods for the 2010–2014 Hyundai Genesis Coupe 2.0T, 2022–2026 Elantra N, 2019–2022 Veloster N, 2022–2023 Kona N, and 2018+ i30 N.
With a 146.13 mm center-to-center length, 22 mm wrist-pin diameter, and 51.003 mm big-end bore, these rods are offered for compatible Hyundai 2.0T engine builds. Always verify the exact engine configuration and component dimensions before installation.
Manufacturer Part Number: 14410-4
Quantity: Set of 4
Manley Turbo Tuff Series: Performance-oriented forged connecting rods for demanding engine applications.
Forged 4340 Steel: Aircraft-quality vacuum-degassed material.
I-Beam Design: Engineered for high-output turbocharged applications.
Set of Four: Complete connecting rod set for a compatible four-cylinder engine.
Precision Machining: Manufactured with controlled dimensional tolerances.
Shot-Peened Construction: Treated after machining.
Magnaflux Inspection: Each connecting rod is individually inspected.
22 mm Wrist-Pin Compatibility: Designed around the specified pin diameter.
3/8-Inch Rod Cap Screws: Included fastening hardware.
Performance Engine Applications: Suitable for properly engineered competition and high-output engine builds.
For compatible Hyundai Elantra N 2.0T engine builds, Manley Turbo Tuff forged connecting rods offer a performance-focused replacement for the factory connecting rods.
Genracer lists this kit for 2022–2026 Hyundai Elantra N applications.
These rods may be considered during performance engine rebuilding, rotating assembly upgrades, and motorsport engine development.
Shop Hyundai Elantra N Performance Parts
The Hyundai Veloster N 2.0T is another listed application for Manley 14410-4 connecting rods.
For compatible 2019–2022 Veloster N engines, these forged I-beam rods provide an option for builders upgrading the engine's rotating assembly.
Verify piston, wrist-pin, bearing, and crankshaft compatibility before installation.
Shop Hyundai Veloster N Performance Parts
Genracer lists the Manley Turbo Tuff connecting rod kit for 2022–2023 Hyundai Kona N applications.
The forged 4340 steel construction and precision-machined design make this kit a performance-oriented option for compatible Kona N engine projects.
Shop Hyundai Kona N Performance Parts
Manley 14410-4 connecting rods are also listed for the 2010–2014 Hyundai Genesis Coupe 2.0T, covering BK1 and BK2 applications.
These rods are intended for compatible performance engine builds using the specified rod dimensions and associated components.
Shop 2010–2012 Genesis Coupe 2.0T Parts
Shop 2013–2014 Genesis Coupe 2.0T Parts
Manley Turbo Tuff connecting rods use an I-beam design and aircraft-quality vacuum-degassed 4340 steel.
Each rod is precision-machined, shot-peened, and individually magnaflux-inspected.
Genracer's listing reports a manufacturer performance rating of approximately 1,000+ horsepower for a four-cylinder application. This is a manufacturer-attributed capability statement, not a guaranteed power rating for every engine configuration.
Actual engine durability depends on the complete rotating assembly, tuning, lubrication, operating conditions, and professional assembly.
| Specification | Details |
|---|---|
| Manufacturer | Manley Performance |
| Series | Turbo Tuff |
| Part Number | 14410-4 |
| Product Type | Forged Connecting Rods |
| Rod Design | I-Beam |
| Material | 4340 Vacuum-Degassed Steel |
| Quantity | 4 Connecting Rods |
| Center-to-Center Length | 5.753 in / 146.13 mm |
| Big-End Bore | 2.008 in / 51.003 mm |
| Big-End Width | 0.860 in / 21.84 mm |
| Wrist-Pin Diameter | 22 mm / 0.866 in |
| Average Rod Weight | 630 g |
| Rod Cap Screws | 3/8 in |
| Surface Treatment | Shot-Peened |
| Inspection | Individually Magnafluxed |
When rebuilding a Hyundai 2.0T engine, consider compatible connecting rod bearings, forged pistons, and main bearings.
Shop ACL Standard Clearance Rod Bearings
Shop ACL Extra Clearance Rod Bearings
Shop ACL Standard Main Bearings
Shop Hyundai Theta 2.0T Engine Parts
All related parts must be checked for compatibility with the exact engine configuration.
Professional engine assembly is recommended.
Before installation:
Verify engine and connecting rod fitment.
Confirm piston and wrist-pin compatibility.
Measure crankshaft rod journals.
Verify connecting rod bearing oil clearance.
Check rotating assembly balance and clearances.
Follow Manley's current rod fastener installation instructions.
Confirm the application is permitted under applicable emissions regulations.
Competition-use notice: The current Genracer listing states that this product is not legal for street use on an emissions-controlled vehicle.
Genracer lists Hyundai Genesis Coupe 2.0T, Elantra N, Veloster N, Kona N, and i30 N applications. Exact compatibility should be confirmed before ordering.
Four forged connecting rods are included.
Yes. They are manufactured from aircraft-quality vacuum-degassed 4340 steel.
The specified center-to-center length is 146.13 mm (5.753 inches).
The rods are specified for a 22 mm wrist pin.
Manley identifies this Turbo Tuff kit as an I-beam connecting rod design.
The listing attributes an approximate 1,000+ horsepower four-cylinder rating to Manley. This should not be interpreted as a guaranteed limit or result for a particular engine.
The listing identifies a four-rod kit. Pistons and bearings should be purchased separately unless otherwise specified.
Build your Hyundai 2.0T engine with Manley Turbo Tuff 4340 Forged I-Beam Connecting Rods – Part #14410-4.
Featuring precision-machined forged steel construction, shot-peened surfaces, individual magnaflux inspection, and a complete set of four rods, this kit offers a performance-oriented option for compatible Hyundai turbocharged engines.
Over all fantastic. From the ordering process, to how fast the shipping is and also the customer service. This is why I only shop on GenRacer for my coupe! Keep up the stellar work
Posted By: David Taylor
I recently purchased the ARK test pipes for my 2010 Hyundai Genesis Coupe 3.8 and must say was the best thing I’ve done aside from from getting my aftermarket exhaust. Sounds louder and drives faster! No hassle, got the pipes within three days. Thank you GenRacer,
Posted By: Joey Coughlan
Product: Ark Test Pipes
Most places just sell parts and when you call them it feels like you are bothering them. My last transaction with GENRACER left nothing to be desired, meaning it could have not been better. I purchased front and rear WHITELINE sway bars, front & rear DBA rotors, and EBC YELLOWSTUFF brake pads. I called just after I ordered the parts because I received an "out of stock" email notification. When I called back to chat with someone *** answered the phone. He couldn't have been more knowledgeable about exactly what I was looking for when it came to the right brake pad for my needs (street/track). Come to find out the pads I picked (DBA's) were not the best pads for my application so im very glad I talked to ***!! I just recently had everything installed, bedded the pads and I am so happy I used GenRacer for my 16 R-Spec Coupe!! Thanks again ***!!!
Posted By: Steve Richard
Product: EBC Brakesm
This is the best website I have ever ordered my parts from.. everything is shipped on time and in perfect condition. I will keep ordering parts from you guys until I run out of parts to order Haha
Posted By: Lauren Bryant
Product: Spec D Tail lights
Order came fast and looks amazing on my car. I did have one problem where one tail light would blink sequentially and the other didn’t. I sent an email late in the day inquiring about it. I wasn’t expecting a response until at least the following day as it was so late. Within an hour they had gotten back to me informing me of a switch on the inside of the housing where you can choose sequential or regular. Sweet! Top notch customer service.
Posted By: Kevin F.
Product: Spec D Tail Lights