Upgrade your Hyundai Elantra N with SAP Racing Dry Carbon Fiber Window Visors, designed to combine premium carbon fiber styling with practical rain and wind deflection.
Manufactured using 100% dry carbon fiber and prepreg compression molding (PCM) technology, these premium window visors provide a distinctive exterior appearance while allowing fresh air to circulate when the windows are slightly open.
Each visor features a graphene ceramic protective coating and a vehicle-specific design for the Hyundai Elantra CN7 platform.
Whether you're upgrading your Elantra N's exterior styling or looking for a premium alternative to traditional plastic rain guards, SAP Racing carbon fiber window visors offer a combination of appearance, construction quality, and everyday functionality.
Genracer SKU: SZHYCF23001P
100% Dry Carbon Fiber Construction: Genuine carbon fiber rather than carbon-look plastic.
Prepreg Compression Molding: Advanced manufacturing process for consistent construction and finish.
Graphene Ceramic Coating: Protective surface treatment applied to the finished visors.
Rain Deflection: Helps reduce rain entering through partially opened side windows.
Fresh Air Ventilation: Allows windows to remain slightly open for additional airflow.
Premium Carbon Fiber Styling: Complements the Hyundai Elantra N's performance-inspired exterior.
Reduced Direct Sun Glare: Visor design provides some shading near the upper window opening.
Tape-On Installation: Uses double-sided adhesive tape without requiring drilled mounting holes.
Vehicle-Specific Design: Developed for the Hyundai Elantra CN7 platform.
Installation Instructions Included: Manufacturer installation guidance is supplied.
Unlike conventional acrylic or plastic rain guards, SAP Racing window visors use genuine dry carbon fiber.
The prepreg compression molding process creates a premium carbon fiber component with a distinctive woven appearance.
SAP Racing also applies a graphene ceramic coating for additional surface protection.
For Hyundai Elantra N owners who value premium exterior styling, this construction helps distinguish the SAP Racing visors from lower-cost plastic alternatives.
The Hyundai Elantra N features aggressive styling, sculpted body lines, and performance-oriented exterior details.
SAP Racing dry carbon fiber window visors complement this design while providing everyday ventilation benefits.
The visors are intended for compatible Hyundai Elantra N models on the CN7 platform.
Fitment Note: Verify exact model-year compatibility before ordering, particularly for facelift models.
Shop Hyundai Elantra N Performance Parts
Window visors help deflect rain away from the upper window opening, allowing limited ventilation while helping keep the cabin dry.
Opening the windows slightly can improve airflow through the cabin.
The genuine carbon fiber finish complements other carbon fiber exterior upgrades.
The tape-on mounting system allows installation without drilling into the vehicle body.
| Specification | Details |
|---|---|
| Brand | SAP Racing / SAPart |
| Genracer SKU | SZHYCF23001P |
| Product Type | Window Visors / Rain Deflectors |
| Material | 100% Dry Carbon Fiber |
| Construction | Prepreg Compression Molding |
| Finish Protection | Graphene Ceramic Coating |
| Vehicle Platform | Hyundai Elantra CN7 |
| Intended Vehicle | Hyundai Elantra N |
| Installation Method | Double-Sided Adhesive Tape |
| Installation Instructions | Included |
SAP Racing window visors are designed for adhesive installation.
For best results:
Thoroughly clean and dry the installation surfaces.
Follow the supplied manufacturer instructions.
Position each visor carefully before applying the adhesive.
Apply even pressure to secure the visor.
Avoid driving faster than 65 mph during the first 12 hours after installation.
Do not wash the vehicle for 24–48 hours after installation.
Follow the manufacturer instructions for any additional surface preparation or adhesive curing requirements.
Yes. The manufacturer describes them as 100% dry carbon fiber components manufactured using prepreg compression molding.
They are marketed for the Hyundai Elantra N on the CN7 platform. Confirm your specific model year before ordering.
No. They use genuine dry carbon fiber construction.
Yes. Their rain-deflector design helps reduce rain entering through partially opened side windows.
No. They are installed using double-sided adhesive tape.
Yes. SAP Racing specifies a graphene ceramic coating.
No. SAP Racing recommends waiting 24–48 hours before washing the vehicle.
SAP Racing advises against driving over 65 mph during the first 12 hours after installation.
No horsepower gains or measurable aerodynamic performance improvements are claimed for this product. It is primarily a premium styling and weather-deflection accessory.
Enhance your Hyundai Elantra N with SAP Racing Dry Carbon Fiber Window Visors.
Featuring genuine prepreg carbon fiber construction, graphene ceramic coating, and convenient tape-on installation, these premium rain deflectors provide a distinctive exterior upgrade for Hyundai N enthusiasts.
Over all fantastic. From the ordering process, to how fast the shipping is and also the customer service. This is why I only shop on GenRacer for my coupe! Keep up the stellar work
Posted By: David Taylor
I recently purchased the ARK test pipes for my 2010 Hyundai Genesis Coupe 3.8 and must say was the best thing I’ve done aside from from getting my aftermarket exhaust. Sounds louder and drives faster! No hassle, got the pipes within three days. Thank you GenRacer,
Posted By: Joey Coughlan
Product: Ark Test Pipes
Most places just sell parts and when you call them it feels like you are bothering them. My last transaction with GENRACER left nothing to be desired, meaning it could have not been better. I purchased front and rear WHITELINE sway bars, front & rear DBA rotors, and EBC YELLOWSTUFF brake pads. I called just after I ordered the parts because I received an "out of stock" email notification. When I called back to chat with someone *** answered the phone. He couldn't have been more knowledgeable about exactly what I was looking for when it came to the right brake pad for my needs (street/track). Come to find out the pads I picked (DBA's) were not the best pads for my application so im very glad I talked to ***!! I just recently had everything installed, bedded the pads and I am so happy I used GenRacer for my 16 R-Spec Coupe!! Thanks again ***!!!
Posted By: Steve Richard
Product: EBC Brakesm
This is the best website I have ever ordered my parts from.. everything is shipped on time and in perfect condition. I will keep ordering parts from you guys until I run out of parts to order Haha
Posted By: Lauren Bryant
Product: Spec D Tail lights
Order came fast and looks amazing on my car. I did have one problem where one tail light would blink sequentially and the other didn’t. I sent an email late in the day inquiring about it. I wasn’t expecting a response until at least the following day as it was so late. Within an hour they had gotten back to me informing me of a switch on the inside of the housing where you can choose sequential or regular. Sweet! Top notch customer service.
Posted By: Kevin F.
Product: Spec D Tail Lights