Upgrade your Hyundai 2.0T engine build with ACL Race Series Extra Clearance Connecting Rod Bearings, Part #4B1293HX-STD.
These high-performance tri-metal connecting rod bearings feature 0.001 inch of additional oil clearance compared with the corresponding standard-clearance bearing configuration.
Designed for compatible Hyundai Theta 2.0T engine applications, these ACL Race Series bearings provide a specialized bearing option for performance engine rebuilds, high-output turbocharged engines, and motorsport applications where increased connecting rod bearing clearance is required.
ACL Part Number: 4B1293HX-STD
Bearing Size: Standard (STD)
Additional Oil Clearance: +0.001 inch (0.0254 mm)
ACL Race Series: Performance-oriented connecting rod bearings for demanding engine applications.
Extra Oil Clearance: Provides 0.001 inch of additional clearance compared with the standard-clearance version.
Standard-Size Bearings: Intended for compatible standard-size crankshaft connecting rod journals.
Tri-Metal Construction: Multilayer bearing construction with hardened steel backing.
Precision Bearing Dimensions: Manufactured for engine builders selecting specific bearing clearances.
Performance Engine Applications: Suitable for compatible turbocharged and motorsport engine builds.
Connecting Rod Bearing Application: Designed for the crankshaft-to-connecting-rod interface.
Extra-clearance connecting rod bearings provide additional oil clearance between the crankshaft rod journal and the bearing surface.
The ACL 4B1293HX-STD bearing set provides 0.001 inch of additional oil clearance compared with its corresponding standard-clearance version.
Engine builders may select this bearing configuration when their measured engine dimensions and intended operating conditions require increased bearing clearance.
Extra clearance is not automatically better for every engine. Correct bearing selection depends on crankshaft journal dimensions, connecting rod housing measurements, oil viscosity, lubrication requirements, and the engine builder's specified clearance targets.
The Hyundai Genesis Coupe 2.0T is a popular platform for performance engine rebuilding, turbocharger upgrades, and motorsports.
ACL Race Series extra-clearance connecting rod bearings provide an option for compatible Genesis Coupe G4KF 2.0T engines when the required bearing dimensions and clearances match.
These bearings are intended for standard-size crankshaft rod journals with an extra-clearance bearing configuration.
Shop 2010–2012 Hyundai Genesis Coupe 2.0T Parts
Shop 2013–2014 Hyundai Genesis Coupe 2.0T Parts
For compatible Hyundai Elantra N 2.0T performance engine builds, ACL Race Series extra-clearance rod bearings may be considered where the engine builder specifies additional connecting rod bearing oil clearance.
Confirm exact engine compatibility, crankshaft dimensions, and bearing specifications before ordering.
Shop Hyundai Elantra N Performance Parts
The Hyundai Veloster N 2.0T is another application referenced by Genracer for this ACL rod bearing set.
For performance-oriented engine rebuilds, verify the connecting rod housing dimensions and crankshaft journal measurements before selecting the extra-clearance configuration.
Shop Hyundai Veloster N Performance Parts
For compatible Hyundai Kona N 2.0T engine builds, ACL 4B1293HX-STD provides an extra-clearance connecting rod bearing option where the engine's specifications match.
Shop Hyundai Kona N Performance Parts
Genracer offers separate ACL Race Series connecting rod bearing configurations.
Standard Clearance – ACL 4B1293H-STD
Standard-size connecting rod bearings
Standard oil-clearance configuration
For compatible engine builds requiring standard bearing clearance
Shop ACL Standard Clearance Rod Bearings
Extra Clearance – ACL 4B1293HX-STD
Standard-size connecting rod bearings
Additional 0.001-inch oil clearance
For compatible engine builds requiring increased bearing clearance
Always select bearings based on actual engine measurements rather than horsepower goals alone.
| Specification | Details |
|---|---|
| Manufacturer | ACL |
| Product Series | Race Series |
| Part Number | 4B1293HX-STD |
| Product Type | Connecting Rod Bearings |
| Bearing Size | Standard (STD) |
| Additional Oil Clearance | +0.001 in (0.0254 mm) |
| Construction | Tri-Metal with Hardened Steel Backing |
| Minimum Rod Housing Bore | 51.000 mm |
| Maximum Rod Housing Bore | 51.018 mm |
| Minimum Crankshaft Rod Journal | 47.954 mm |
| Maximum Crankshaft Rod Journal | 47.972 mm |
| Maximum Wall Thickness at Crown | 1.500 mm |
| Maximum Overall Length | 17.00 mm |
| Package Quantity | Confirm before publishing |
Proper bearing selection and engine assembly are essential for reliable operation.
Before installation:
Measure every crankshaft connecting rod journal.
Inspect crankshaft surfaces for wear and damage.
Verify connecting rod housing bore dimensions.
Confirm the required connecting rod bearing oil clearance.
Inspect connecting rods and fasteners.
Follow the engine manufacturer's lubrication and assembly procedures.
Verify bearing seating and alignment.
Professional engine assembly is recommended.
ACL 4B1293HX-STD is a Race Series standard-size connecting rod bearing set with 0.001 inch of additional oil clearance.
In this bearing configuration, HX identifies the extra-clearance version.
These are standard-size bearings with additional oil clearance. They are not intended as a substitute for correctly sized undersize bearings on a reground crankshaft.
The product specifies an additional 0.001 inch, equivalent to approximately 0.0254 mm.
4B1293H-STD is the standard-clearance version. 4B1293HX-STD provides an additional 0.001 inch of oil clearance.
Not necessarily. The correct oil clearance depends on the engine's measurements, lubrication system, operating conditions, and the engine builder's requirements.
These vehicles are referenced in Genracer's product title. Verify the exact engine application and bearing dimensions before ordering.
This product is a connecting rod bearing set. Main bearings are separate components.
For compatible Hyundai 2.0T performance engine builds requiring increased connecting rod bearing oil clearance, choose ACL Race Series Extra Clearance Rod Bearings – 4B1293HX-STD.
Featuring tri-metal construction, standard-size dimensions, and 0.001 inch of additional oil clearance, these bearings offer a specialized option for engine builders.
Buy ACL Extra Clearance Rod Bearings at Genracer
For related engine components, explore ACL Standard Clearance Rod Bearings and ACL Extra Clearance Main Bearings.
Browse more Hyundai Theta 2.0T Engine Parts at Genracer.
Over all fantastic. From the ordering process, to how fast the shipping is and also the customer service. This is why I only shop on GenRacer for my coupe! Keep up the stellar work
Posted By: David Taylor
I recently purchased the ARK test pipes for my 2010 Hyundai Genesis Coupe 3.8 and must say was the best thing I’ve done aside from from getting my aftermarket exhaust. Sounds louder and drives faster! No hassle, got the pipes within three days. Thank you GenRacer,
Posted By: Joey Coughlan
Product: Ark Test Pipes
Most places just sell parts and when you call them it feels like you are bothering them. My last transaction with GENRACER left nothing to be desired, meaning it could have not been better. I purchased front and rear WHITELINE sway bars, front & rear DBA rotors, and EBC YELLOWSTUFF brake pads. I called just after I ordered the parts because I received an "out of stock" email notification. When I called back to chat with someone *** answered the phone. He couldn't have been more knowledgeable about exactly what I was looking for when it came to the right brake pad for my needs (street/track). Come to find out the pads I picked (DBA's) were not the best pads for my application so im very glad I talked to ***!! I just recently had everything installed, bedded the pads and I am so happy I used GenRacer for my 16 R-Spec Coupe!! Thanks again ***!!!
Posted By: Steve Richard
Product: EBC Brakesm
This is the best website I have ever ordered my parts from.. everything is shipped on time and in perfect condition. I will keep ordering parts from you guys until I run out of parts to order Haha
Posted By: Lauren Bryant
Product: Spec D Tail lights
Order came fast and looks amazing on my car. I did have one problem where one tail light would blink sequentially and the other didn’t. I sent an email late in the day inquiring about it. I wasn’t expecting a response until at least the following day as it was so late. Within an hour they had gotten back to me informing me of a switch on the inside of the housing where you can choose sequential or regular. Sweet! Top notch customer service.
Posted By: Kevin F.
Product: Spec D Tail Lights