Build your Hyundai 2.0T engine with ACL Race Series Extra Clearance Main Bearings, Part #5M1295HX-STD.
These high-performance tri-metal crankshaft main bearings feature 0.001 inch of additional oil clearance compared with the corresponding standard-clearance version, making them an option for engine builds requiring increased bearing clearance.
Designed for compatible Hyundai 2.0T applications, ACL Race Series bearings incorporate performance-oriented bearing geometry, reinforced construction, and precision manufacturing for demanding engine applications.
ACL Part Number: 5M1295HX-STD
Bearing Size: Standard (STD)
Additional Oil Clearance: +0.001 inch (0.0254 mm)
ACL Race Series: High-performance engine bearings designed for demanding applications.
Extra Oil Clearance: Provides an additional 0.001 inch of clearance compared with the standard-clearance version.
Standard-Size Bearings: Intended for compatible standard-size crankshaft journals, subject to measurement.
Tri-Metal Construction: Performance-oriented multilayer bearing construction.
Increased Bearing Crush: Designed to support secure bearing retention in the housing.
Increased Eccentricity: Helps accommodate bore distortion and support hydrodynamic oil-film formation.
Oil Groove Design: Engineered to balance bearing surface area and oil delivery.
Precision Wall Tolerances: Supports consistent bearing-clearance selection during engine assembly.
Extra-clearance main bearings provide increased space between the crankshaft journal and the bearing surface compared with the corresponding standard-clearance bearing.
The ACL 5M1295HX-STD is designed to provide 0.001 inch of additional oil clearance.
This configuration may be selected by an engine builder when the engine's measured dimensions, operating conditions, and intended oil-clearance targets require additional clearance.
Extra clearance is not automatically better for every engine. The correct bearing choice depends on crankshaft measurements, housing dimensions, lubrication requirements, and the engine builder's specifications.
The Hyundai Genesis Coupe 2.0T is a popular platform for performance engine rebuilds, turbocharged engine development, and motorsport applications.
ACL Race Series extra-clearance main bearings offer a bearing option for compatible Genesis Coupe 2.0T engines where the engine builder requires increased main bearing oil clearance.
Verify exact crankshaft and block compatibility before installation.
Shop 2010–2012 Hyundai Genesis Coupe 2.0T Parts
Shop 2013–2014 Hyundai Genesis Coupe 2.0T Parts
For compatible Hyundai Elantra N 2.0T engine builds, ACL Race Series extra-clearance main bearings may be considered when additional crankshaft oil clearance is required.
Fitment and bearing selection must be confirmed using the engine's actual crankshaft journal and main housing measurements.
Shop Hyundai Elantra N Performance Parts
The Hyundai Veloster N 2.0T is another performance engine platform where bearing-clearance selection is an important consideration during an engine rebuild.
ACL 5M1295HX-STD should be selected only after confirming application compatibility and the required bearing clearance.
Shop Hyundai Veloster N Performance Parts
For Hyundai Kona N 2.0T engine builds, verify the engine's bearing dimensions and the manufacturer's application data before selecting an extra-clearance bearing set.
Shop Hyundai Kona N Performance Parts
Genracer offers two distinct ACL Race Series main bearing options:
Standard Clearance – 5M1295H-STD
Standard-size main bearings
Standard oil-clearance configuration
For compatible engine builds requiring the standard bearing specification
Shop ACL Standard Clearance Main Bearings
Extra Clearance – 5M1295HX-STD
Standard-size main bearings
Additional 0.001-inch oil clearance
For compatible engine builds requiring increased bearing clearance
The correct option must be determined from actual engine measurements. Extra-clearance bearings should not be selected solely because the engine will be used for racing or higher horsepower.
| Specification | Details |
|---|---|
| Brand | ACL |
| Product Series | Race Series |
| Part Number | 5M1295HX-STD |
| Product Type | Crankshaft Main Bearing Set |
| Bearing Size | Standard (STD) |
| Additional Oil Clearance | +0.001 in (0.0254 mm) |
| Construction | Tri-Metal |
| Minimum Block Tunnel Bore | 56.000 mm |
| Maximum Block Tunnel Bore | 56.018 mm |
| Minimum Crankshaft Main Journal | 51.942 mm |
| Maximum Crankshaft Main Journal | 51.960 mm |
| Maximum Wall Thickness at Crown | 2.009 mm |
| Maximum Overall Length | 18.00 mm |
Correct bearing clearance is essential for engine reliability.
Before installation:
Measure all crankshaft main journals.
Check the main bearing housing dimensions.
Confirm the target bearing oil clearance.
Inspect the crankshaft for wear or damage.
Verify bearing alignment and oil passage positioning.
Follow the engine manufacturer's assembly procedures.
Confirm the required bearing set and any separately needed thrust components.
Professional engine assembly is recommended.
It is an ACL Race Series standard-size main bearing set with 0.001 inch of additional oil clearance.
In this product designation, HX identifies the extra-clearance version compared with the corresponding standard-clearance bearing.
They are standard-size bearings with extra oil clearance. The extra clearance does not mean the crankshaft has been ground undersize.
The product is specified with an additional 0.001 inch (0.0254 mm) of oil clearance.
5M1295H-STD is the standard-clearance version. 5M1295HX-STD provides an additional 0.001 inch of oil clearance.
Not automatically. The correct bearing clearance depends on engine measurements, operating conditions, lubrication requirements, and the engine builder's specifications.
Confirm compatibility using ACL's application data and the exact engine dimensions before ordering. Do not assume all Hyundai 2.0T engines use identical bearings.
For performance engine builds requiring increased crankshaft main bearing oil clearance, choose ACL Race Series 5M1295HX-STD Extra Clearance Main Bearings.
With tri-metal construction and 0.001 inch of additional clearance, this bearing set provides a specialized option for compatible Hyundai 2.0T engine applications.
Buy ACL Extra Clearance Main Bearings at Genracer
Also available: ACL Standard Clearance Main Bearings – 5M1295H-STD.
Browse more Hyundai Theta 2.0T Engine Parts and Hyundai Genesis Coupe Performance Parts.
Over all fantastic. From the ordering process, to how fast the shipping is and also the customer service. This is why I only shop on GenRacer for my coupe! Keep up the stellar work
Posted By: David Taylor
I recently purchased the ARK test pipes for my 2010 Hyundai Genesis Coupe 3.8 and must say was the best thing I’ve done aside from from getting my aftermarket exhaust. Sounds louder and drives faster! No hassle, got the pipes within three days. Thank you GenRacer,
Posted By: Joey Coughlan
Product: Ark Test Pipes
Most places just sell parts and when you call them it feels like you are bothering them. My last transaction with GENRACER left nothing to be desired, meaning it could have not been better. I purchased front and rear WHITELINE sway bars, front & rear DBA rotors, and EBC YELLOWSTUFF brake pads. I called just after I ordered the parts because I received an "out of stock" email notification. When I called back to chat with someone *** answered the phone. He couldn't have been more knowledgeable about exactly what I was looking for when it came to the right brake pad for my needs (street/track). Come to find out the pads I picked (DBA's) were not the best pads for my application so im very glad I talked to ***!! I just recently had everything installed, bedded the pads and I am so happy I used GenRacer for my 16 R-Spec Coupe!! Thanks again ***!!!
Posted By: Steve Richard
Product: EBC Brakesm
This is the best website I have ever ordered my parts from.. everything is shipped on time and in perfect condition. I will keep ordering parts from you guys until I run out of parts to order Haha
Posted By: Lauren Bryant
Product: Spec D Tail lights
Order came fast and looks amazing on my car. I did have one problem where one tail light would blink sequentially and the other didn’t. I sent an email late in the day inquiring about it. I wasn’t expecting a response until at least the following day as it was so late. Within an hour they had gotten back to me informing me of a switch on the inside of the housing where you can choose sequential or regular. Sweet! Top notch customer service.
Posted By: Kevin F.
Product: Spec D Tail Lights