Upgrade your Hyundai Genesis Coupe 2.0T engine with JE Forged 86.5mm Oversized Pistons, Part #298947.
Manufactured from 2618-T6 high-strength forged aluminum, these performance pistons are engineered for demanding turbocharged engine builds, performance rebuilds, and motorsport applications.
Featuring an 86.5mm bore diameter (+0.50mm oversize) and an advertised 9.0:1 compression ratio, this piston set is designed for compatible Hyundai 2.0T engines requiring an oversized piston configuration.
The kit includes four forged pistons, piston rings, carbon steel wrist pins, and wire locks.
2618-T6 Forged Aluminum: High-strength piston material for demanding performance applications.
86.5mm Bore Diameter: 0.50mm oversized configuration.
9.0:1 Advertised Compression Ratio: Based on the specified engine configuration.
Complete Four-Piston Set: Covers a compatible four-cylinder engine.
Piston Rings Included: Supplied with the specified JE ring set.
Carbon Steel Wrist Pins: Includes 0.866 × 2.250-inch pins.
Wire Locks Included: Supplied for wrist-pin retention.
Smooth Crown Geometry: Designed with smooth dome and dish contours.
Performance Engine Applications: Intended for compatible turbocharged and competition-oriented builds.
The Hyundai Genesis Coupe 2.0T is a popular platform for performance engine builds and turbocharger upgrades.
JE 298947 forged pistons provide a +0.50mm oversized piston option for compatible Genesis Coupe 2.0T engines.
Oversized pistons are commonly selected when an engine block requires cylinder machining or when an engine builder specifies a larger finished cylinder bore.
The block must be measured and machined to the correct finished dimensions using JE's specified piston-to-wall clearance.
Shop 2010–2012 Genesis Coupe 2.0T Parts
Shop 2013–2014 Genesis Coupe 2.0T Parts
Genracer also references the Hyundai Elantra N, Veloster N, and Kona N in this product listing.
For these Hyundai N applications, verify compatibility with JE before ordering. Confirm bore size, piston compression height, wrist-pin dimensions, connecting rod compatibility, and the required compression ratio.
Shop Hyundai Elantra N Performance Parts
Shop Hyundai Veloster N Performance Parts
Shop Hyundai Kona N Performance Parts
JE manufactures these pistons from 2618-T6 forged aluminum, a material used in demanding high-performance engine applications.
Forged piston construction is commonly selected for turbocharged engine builds involving elevated cylinder pressures and temperatures.
Proper piston-to-wall clearance, piston ring end gap, lubrication, and engine calibration remain essential for reliability.
Genracer offers two JE piston configurations for compatible Hyundai 2.0T applications.
Standard Bore – JE 298946
86.0mm piston diameter
Standard-size configuration
Intended for compatible standard-size cylinder bores
Shop JE 86mm Standard Forged Pistons
Oversized Bore – JE 298947
86.5mm piston diameter
+0.50mm oversized configuration
Intended for compatible cylinders finished to the appropriate oversized bore
An oversized piston should not be installed in an unmachined standard-size cylinder.
| Specification | Details |
|---|---|
| Manufacturer | JE Pistons |
| Part Number | 298947 |
| Product Type | Forged Piston Set |
| Material | 2618-T6 Forged Aluminum |
| Quantity | 4 Pistons |
| Bore Diameter | 86.5mm |
| Oversize | +0.50mm |
| Stroke Reference | 86mm |
| Rod Length Reference | 146mm |
| Compression Height | 30mm |
| Advertised Compression Ratio | 9.0:1 |
| Dome/Dish Volume | -6.2cc |
| Listed Piston Weight | 306g |
| Piston Ring Widths | 1.0 / 1.2 / 2.8mm |
| Wrist Pin Dimensions | 0.866 × 2.250 in |
| Ring Set Part Number | JG1004-3405 |
| Piston Rings | Included |
| Wrist Pins | Included |
| Wire Locks | Included |
For a complete Hyundai 2.0T engine rebuild, consider compatible forged connecting rods and performance engine bearings.
Shop Manley Forged Connecting Rods
Shop ACL Standard Connecting Rod Bearings
Shop ACL Extra Clearance Rod Bearings
Shop Hyundai Theta 2.0T Engine Components
Always verify dimensional compatibility before assembling the rotating assembly.
Professional engine assembly and machining are strongly recommended.
Before installation:
Measure and inspect the engine block's cylinder bores.
Confirm the required finished bore diameter.
Machine and hone cylinders according to JE's piston-to-wall clearance specifications.
Verify connecting rod and wrist-pin compatibility.
Measure and set piston ring end gaps according to JE's instructions.
Check piston-to-valve and deck clearances.
Verify the final compression ratio.
Follow the manufacturer's installation and lubrication procedures.
These pistons have an 86.5mm bore diameter.
They are 0.50mm larger in diameter than the 86.0mm standard-size version.
Yes. They are manufactured from 2618-T6 forged aluminum.
The kit includes four pistons.
Yes. The Genracer listing specifies that piston rings are included.
Yes. Both are included.
The advertised compression ratio is 9.0:1 for the specified engine configuration. Actual compression depends on the assembled engine.
These are oversized pistons and require correctly finished cylinder dimensions. The necessary machining depends on the block's current condition and measurements.
These vehicles are referenced in Genracer's product title, but exact compatibility should be verified with JE before purchasing.
Upgrade your compatible Hyundai 2.0T engine with JE Forged 86.5mm Oversized Pistons – Part #298947.
Featuring 2618-T6 forged aluminum construction, +0.50mm oversized bore dimensions, and included piston rings, wrist pins, and wire locks, this kit offers a performance-oriented solution for compatible engine rebuilds.
Over all fantastic. From the ordering process, to how fast the shipping is and also the customer service. This is why I only shop on GenRacer for my coupe! Keep up the stellar work
Posted By: David Taylor
I recently purchased the ARK test pipes for my 2010 Hyundai Genesis Coupe 3.8 and must say was the best thing I’ve done aside from from getting my aftermarket exhaust. Sounds louder and drives faster! No hassle, got the pipes within three days. Thank you GenRacer,
Posted By: Joey Coughlan
Product: Ark Test Pipes
Most places just sell parts and when you call them it feels like you are bothering them. My last transaction with GENRACER left nothing to be desired, meaning it could have not been better. I purchased front and rear WHITELINE sway bars, front & rear DBA rotors, and EBC YELLOWSTUFF brake pads. I called just after I ordered the parts because I received an "out of stock" email notification. When I called back to chat with someone *** answered the phone. He couldn't have been more knowledgeable about exactly what I was looking for when it came to the right brake pad for my needs (street/track). Come to find out the pads I picked (DBA's) were not the best pads for my application so im very glad I talked to ***!! I just recently had everything installed, bedded the pads and I am so happy I used GenRacer for my 16 R-Spec Coupe!! Thanks again ***!!!
Posted By: Steve Richard
Product: EBC Brakesm
This is the best website I have ever ordered my parts from.. everything is shipped on time and in perfect condition. I will keep ordering parts from you guys until I run out of parts to order Haha
Posted By: Lauren Bryant
Product: Spec D Tail lights
Order came fast and looks amazing on my car. I did have one problem where one tail light would blink sequentially and the other didn’t. I sent an email late in the day inquiring about it. I wasn’t expecting a response until at least the following day as it was so late. Within an hour they had gotten back to me informing me of a switch on the inside of the housing where you can choose sequential or regular. Sweet! Top notch customer service.
Posted By: Kevin F.
Product: Spec D Tail Lights