Build your Hyundai Genesis Coupe 2.0T engine with JE Forged Standard Size Pistons, Part #298946.
Manufactured from high-strength 2618-T6 forged aluminum, these performance pistons are engineered for demanding turbocharged engine applications, including performance rebuilds and motorsport engine projects.
The kit includes four forged pistons, piston rings, wrist pins, and wire locks, providing the primary piston components needed for a compatible four-cylinder engine build.
With an 86.0 mm standard bore and an advertised 9.0:1 compression ratio in the specified engine configuration, JE 298946 pistons are designed for builders seeking a forged piston solution for compatible Hyundai 2.0T engines.
2618-T6 Forged Aluminum: High-strength material selected for demanding performance engine applications.
86.0 mm Standard Bore: Intended for compatible engines with properly measured standard-size cylinder bores.
9.0:1 Advertised Compression Ratio: Based on JE's specified engine configuration.
Complete Four-Piston Set: Includes pistons for all four cylinders.
Piston Rings Included: Supplied with the specified JE ring set.
Carbon Steel Wrist Pins: Includes 0.866 × 2.250-inch wrist pins.
Wire Locks Included: Supplied for wrist-pin retention.
Performance Piston Design: Smooth dome and dish contours intended to support combustion-chamber performance.
The Hyundai Genesis Coupe 2.0T is a popular platform for performance engine rebuilding, turbocharger upgrades, and motorsport projects.
JE 298946 forged pistons provide an alternative to cast factory pistons for compatible 2010–2014 Genesis Coupe 2.0T engines.
Their 2618-T6 forged aluminum construction is designed for demanding applications where proper piston sizing, cylinder-wall clearance, lubrication, and tuning are essential.
Shop 2010–2012 Genesis Coupe 2.0T Parts
Shop 2013–2014 Genesis Coupe 2.0T Parts
Genracer also references the Hyundai Elantra N, Veloster N, and Kona N in this product listing.
For these engines, confirm the exact piston application with JE and verify bore size, compression height, connecting rod length, wrist-pin compatibility, combustion-chamber volume, and required compression ratio before ordering.
JE uses 2618-T6 aluminum alloy for performance applications involving demanding cylinder pressures and operating conditions.
This material is well suited to properly engineered high-performance engine assemblies.
Because forged piston alloys expand with heat, piston-to-wall clearance and engine assembly procedures must follow JE's specifications for the exact piston design.
The JE 298946 piston set uses an 86.0 mm standard bore.
If an engine block has worn or damaged cylinder walls, machining may require a larger piston size.
Genracer also offers a JE 0.5 mm oversized piston set for compatible Genesis Coupe 2.0T applications.
Shop JE 0.5mm Oversized Pistons
Always measure the cylinder bores and determine the required machining before selecting piston size.
| Specification | Details |
|---|---|
| Manufacturer | JE Pistons |
| Manufacturer Part Number | 298946 |
| Product Type | Forged Piston Set |
| Material | 2618-T6 Forged Aluminum |
| Quantity | 4 Pistons |
| Bore Diameter | 86.0 mm |
| Bore Size | Standard (STD) |
| Stroke Reference | 86 mm |
| Rod Length Reference | 146 mm |
| Compression Height | 30 mm |
| Advertised Compression Ratio | 9.0:1 |
| Dome Volume | -5.5 cc |
| Piston Weight | 304 g (listed specification) |
| Piston Ring Widths | 1.0 / 1.2 / 2.8 mm |
| Wrist-Pin Dimensions | 0.866 × 2.250 in |
| Ring Set Part Number | JG1004-3386 |
| Piston Rings | Included |
| Wrist Pins | Included |
| Wire Locks | Included |
For a complete performance engine build, consider compatible forged connecting rods, connecting rod bearings, and crankshaft main bearings.
Shop Manley Forged Connecting Rods
Shop ACL Standard Connecting Rod Bearings
Shop ACL Standard Main Bearings
Browse Genesis Coupe Pistons & Connecting Rods
Verify dimensional compatibility between all rotating assembly components.
Professional engine assembly is strongly recommended.
Before installation:
Measure the cylinder bores and determine the required piston-to-wall clearance.
Confirm piston orientation and wrist-pin compatibility.
Verify connecting rod and crankshaft dimensions.
Set piston ring end gaps according to JE's instructions and the intended engine application.
Check piston-to-valve and deck clearances.
Follow JE's piston installation and lubrication requirements.
Confirm engine calibration is appropriate for the final compression ratio and build.
Genracer's detailed fitment list covers 2010–2014 Hyundai Genesis Coupe 2.0T applications. The listing also mentions Elantra N, Veloster N, and Kona N; confirm those applications with JE before ordering.
Yes. They have an 86.0 mm standard bore.
Four forged pistons are included.
Yes. Genracer specifies that piston rings are included.
Yes. Both are included.
The listed compression ratio is 9.0:1 for the specified engine configuration. Actual compression depends on the completed engine assembly.
JE designed these forged pistons for demanding performance applications, including compatible turbocharged engine builds.
Potentially, provided the connecting rod length, wrist-pin diameter, piston geometry, and other dimensions are compatible.
That depends on the measured condition and final machined dimensions of the cylinder bores.
Upgrade your Hyundai 2.0T engine with JE Forged Standard Size Pistons – Part #298946.
Featuring 2618-T6 forged aluminum construction, an 86 mm bore, and an advertised 9.0:1 compression ratio, this four-piston set provides a performance-oriented option for compatible engine builds.
Buy JE Forged 86mm Pistons at Genracer
Explore more Hyundai Theta 2.0T Engine Components and Pistons & Connecting Rods.
Over all fantastic. From the ordering process, to how fast the shipping is and also the customer service. This is why I only shop on GenRacer for my coupe! Keep up the stellar work
Posted By: David Taylor
I recently purchased the ARK test pipes for my 2010 Hyundai Genesis Coupe 3.8 and must say was the best thing I’ve done aside from from getting my aftermarket exhaust. Sounds louder and drives faster! No hassle, got the pipes within three days. Thank you GenRacer,
Posted By: Joey Coughlan
Product: Ark Test Pipes
Most places just sell parts and when you call them it feels like you are bothering them. My last transaction with GENRACER left nothing to be desired, meaning it could have not been better. I purchased front and rear WHITELINE sway bars, front & rear DBA rotors, and EBC YELLOWSTUFF brake pads. I called just after I ordered the parts because I received an "out of stock" email notification. When I called back to chat with someone *** answered the phone. He couldn't have been more knowledgeable about exactly what I was looking for when it came to the right brake pad for my needs (street/track). Come to find out the pads I picked (DBA's) were not the best pads for my application so im very glad I talked to ***!! I just recently had everything installed, bedded the pads and I am so happy I used GenRacer for my 16 R-Spec Coupe!! Thanks again ***!!!
Posted By: Steve Richard
Product: EBC Brakesm
This is the best website I have ever ordered my parts from.. everything is shipped on time and in perfect condition. I will keep ordering parts from you guys until I run out of parts to order Haha
Posted By: Lauren Bryant
Product: Spec D Tail lights
Order came fast and looks amazing on my car. I did have one problem where one tail light would blink sequentially and the other didn’t. I sent an email late in the day inquiring about it. I wasn’t expecting a response until at least the following day as it was so late. Within an hour they had gotten back to me informing me of a switch on the inside of the housing where you can choose sequential or regular. Sweet! Top notch customer service.
Posted By: Kevin F.
Product: Spec D Tail Lights